PUROS delivers perfect water quality for high-pressure pumps from any water source
Our PUROS-Systems are characterized by various features and advantages:
- They increase the lifespan of high pressure pumps
- They are cost-effective, low-maintenance and amortize fast
- They produce crystal clear, cloudless, soft water
- They work without chemicals and error-prone electronic controls
- They utilize 100% of supplied water
- They are easy to handle
- They are superior to reverse osmosis (RO-) systems in cost, maintenance and water quality
PUROS protects high pressure technology against all types of pollution, reduces wear and maintenance

PUROS is available as standard or compact version

PUROS produces optimal feed water for waterjet cutting with the latest generation of eco friendly technology!
How PUROS works
Pre-cleaning
Every water treatment starts with the prefiltration of suspended solids. PUROS uses activated carbon media in order to adsorb free chlorine which is periodically used by water suppliers to disinfect the drinking water supply line.

STAGE 1: Slimline; size: 20” x 2,5”; purpose: Filtration of suspended solids (down to 10µm) and free chlorine; change interval: 6 months or pressure drop > 6psi (0,4bar).
There are impurities, such as corrosion products from municipal water supply networks, which need to undergo special pre-treatment before they are filterable. With the second stage oxidizing filter, a wide range of impurities is removed. The feedwater turns crystal clear with very low turbidity.
STAGE 2: Big Blue; size: 20” x 4,5”; purpose: Oxidizing and removal of impurities, such as heavy metals and others; change interval: Every 3 months or after a max. water flow of 200m³.
Special changes in water properties

Softening
An effective softening of the water hardness is highly important. Therefore, PUROS uses a catalyst which transforms calcium and magnesium hardness into insoluble micro-crystals of calcium carbonate.

This solution has been tested and integrated in our water treatment since 2010, due to trouble with traditional ion-exchange-softening systems. In this way, there is no scaling from water hardness in the waterjet pump without using a failure prone standard softening application. A micro bubble deaerator removes carbon dioxide which is a side product of the hardness clearing.
Preventing the crystallization of silica
Silicates lead to the formation of glassy crystals and sludge in high-pressure pumps. These crystals are responsible for the short running times of seals and nozzles.

With a second catalyst the silica-anions (negatively charged) are separated from positively charged cations in the form of ionic bonds on the surface, called EXO (outside), on strong positively charged beads. With the change of its surface load from negative charge to positive charge the silica is unable to form crystals.
STAGE 3: Size: 8” x 35”; black process container combined with a micro bubble deaerator; purpose: Two different catalysts operating in an upstream fluidized bed process; Change interval of the black process container: Every 3 years.
Preventing Cavitation inside high-pressure pumps
All tap water has a certain carbonic acid content. Because of pollution through traffic and heating, the water in urban areas generally has a higher carbonic acid content than the water in rural areas.
Especially for high-pressure pumps applies: The lower the carbon dioxide content, the lower the wear and tear due to cavitation, which is reflected in the service life of high-pressure pumps.

After pre-separation with a mechanical device, the content of carbonic acid is completely removed with the SICO-filter. The pressure vessel contains beads of adsorber material which binds the content of carbonic acid. Most of it and additional the content of silica is removed by backwashing the SICO-filter once a week.

STAGE 4: Size: 10” x 54”; green process container with two-way valve on top; purpose: Beads of magnesium oxide combined with an adsorber remove carbonic acid and silica; change interval: No change required, only refill of consumed material every 3 months.
Post-cleaning, Disinfection and Surveillance

After the optimisation, the water is lead to the frontside of PUROS again, where side products from these processes are filtered out.
Especially when the waterjet is not used for a longer time, the water inside of the filters is in danger of bacterial contamination. With the same special nano-fibre filter, bacteria will additionally be killed and removed.
STAGE 5: Big Blue; size: 20” x 4,5”; purpose: Removal of process impurities and bacteria; change interval: Every 3 months, or after a max. water flow of 200m³.
It is of high importance that especially the Big-Blue working filters are changed in time. Otherwise, there will be a breakthrough of solids which should not reach the high-pressure pump because of possible damages.
Therefore, the last filter has to block the water flow if there is a breakthrough of solids. This way the pump is protected perfectly.
For inquiries or orders please use info@europure.de